POMOLY Fold X | Titanium Wood Stove | Fastfold Tent Stove | POMOLY New Arrival 2024

POMOLY Fold X

Titanium Stove

Faster than faster.

Fastfold firebox

Multiple high-precision hinges

6cm Titanium chimney system

New titanium spark arrestor

New firebox bottom plate

Overall 0.6mm thickness TA1 titanium

Adjustable and detachable smoke damper

Reinforced structure top cover

Strengthened four courners and firebox

Lengthened side air intake

Ultralight titanium side shelves

Hollow whole plate folding titanium stove legs

WHAT'S INCLUDED:

Fold X Titanium Stove

Titanium Chimney (3m)

Titanium Smoke Damper Base

Titanium Spark Arrestor

Cut Resistant Gloves

Heat Resistant Gloves

Stove Bag (YKK Zipper)

*Tools (Titanium screw and wrench)

TITANIUM CHIMNEY SYSTEM - 6cm/2.36in

Ultralight spark arrestor, three detachable rings for wind ropes fixing. Reduce the hollow area, the convex is good for catching sparks. Upgraded to embedded inverted. (Used with titanium section chimney). The chimney damper base is upgraded to fully welded for enhanced durability.

Fastfold Firebox

The firebox of Fold X can be set up in one minute, and all accessories can be placed inside the foldable firebox.

Multiple High-Precision Hinges

The 8 hinges are all made of high-precision equipment, with four of them using built-in hinges to enhance the airtightness of the firebox.

Reinforced Top Cover

The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover. Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover. After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.

Tips: The portable tent stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the portable wood stove to rise and fall continuously, which will eventually cause the top cover to warping.

REINFORCED BOTTOM PLATE

Under the condition of ensuring light weight and portability, Fold X adopts a double-row three-dimensional reinforced bottom plate. The 25 welding points minimize the deformation of the firebox after burning. 12 hollow octagons can enhance the heat dissipation effect.

After the folding tent stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.

FOLDING LEGS

Fold X legs are made of a whole piece of titanium plate, which has a stronger bearing structure. 

The raised design in the middle of the camping tent stove legs are suitable for uneven ground.

NEW STOVE DOOR

The door of the Fold X Collapsible Wood Stove was widened and heightened so that large pieces of wood to enter the stove easily. The edge of the door was 90-degree folded. The 90-degree edge can strengthen the structure of the door frame.

CNC Titanium Reinforcement Blocks

8 CNC reinforcement blocks can make the structure of the firebox more stable and will not deform even if the stove burns for a long time.

Double Side Air Intake

Fold X Stove has a door with a slidable air intake and an rectangular glass, so that you can fine-tune the burn rate.