T-Brick Max | Portable Titanium Stove for Multiplayer Hot Tent Camping

One is enough.

T-BRICK MAX Titanium tent stove.

1+1 Portable design

Overall 1mm thickness pure titanium

New titanium spark arrestor

Titanium detachable baffle

Adjustable and detachable damper

Three-Dimensional reinforced structure top
2 Titanium side panels + 2 glass side panels

 Unique octagonal glass side panel
Strengthening tent wood stove body
Lengthened front door air intake

Ultralight titanium side shelves

Hollow whole plate folding stove legs

The Best way to roll up titanium chimney:

TWO MODES

When we use  “double-layer” mode, if we fill up the firewood, it can burn longer than T1 and T-Brick.

If you need the maximum firepower for cooking, install two titanium side panels on the bottom of the tent stove and the glass side panels on top. The secondary air intake of the two titanium panels can maximize the burning efficiency.
If you need more firelight for viewing, please install two glass side panels on the same side.

Ultralight titanium spark arrestor

Comes with 3 wind rope fixing ring

Overall TA1 1mm thickness pure titanium

Baffle, Inner titanium panel (0.6mm)

Side panel air intake

Maximum burning efficiency

Three-Dimensional strengthening whole best tent stove body

Enhance the rigidity of the tent wood stove and minimize deformation

Hollow whole laser cutting plate folding hot tent wood stove legs

Non touch welding structure, enhance stability

Titanium detachable baffle

Increase the maximum heat output of titanium stove

Lengthened front door air intake

Increase the air intake

Surface polishing treatment
Improves fatigue resistance of metal

Octagonal glass side panel
Observe the burning situation

Adjustable and detachable damper
Control the intensity of the wood burning

Adjustable sliding air intake control
Control wood burning rate

Folding and panel design
Portable design

WHAT'S INCLUDED:

T-BRICK MAX titanium tent stove

Titanium chimney

2 New titanium wood stove bag

Smoke damper

New spark arrestor with 3 rings

Cut resistant gloves

Detachable baffle

*Tools (titanium screw and wrench)

 NEW SPARK ARRESTOR

40g / 1.4oz Ultralight spark arrestor, Sandblasted surface treatment. 

Three detachable rings for wind ropes fixing.

Reduce the hollow area, the convex is good for catching sparks.

NEW tent stove TOP COVER

The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover.

Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover. 

After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.

Tips: The camping wood stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the stove to rise and fall continuously, which will eventually cause the top cover to warping.

DETACHABLE BAFFLE

The detachable baffle can maximize the burning heat efficiency of the wood. The air enters the camping tent stove through the side air intake panel, which can allow the smoke generated by the burning wood to be reburnt, the heat can be concentrated inside the portable wood stove to increase the temperature of the tent stove. At the same time, there will be less smoke from burning wood.

REINFORCED BOTTOM PLATE

Under the condition of ensuring light weight and portability, T-BRICK adopts a double-row three-dimensional reinforced bottom plate. The 25 welding points minimize the deformation of the furnace after burning. 12 hollow octagons can enhance the heat dissipation effect.

After the portable tent stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.

NEW FOLDING STOVE LEGS

T-BRICK legs are made of a whole piece of titanium plate, which has a stronger bearing structure. 

The raised design in the middle of the portable wood burning stove legs are suitable for uneven ground.

NEW FOUR SIDE PANELS

Compared with the T1 series, the 4 side panels of T-BRICK MAX can be switched freely. 

Inside the tent, we can face the glass side panel and observe the burning of the wood. 

The glass side panel also provides light in your hot tent.

The new secondary intake side panels have been redesigned to be stronger and less deformable after burning.

NEW STOVE DOOR

The door of the T-BRICK MAX was widened and heightened so that large pieces of wood to enter the stove easily. 

The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen 

the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the tent wood burning stove. 

Tips: When we use T-BRICK MAX mode, if the firewood exceeds half of the tent stovebody, please don't open the door 

at the bottom to prevent the firewood from fall out, just open the ajustable air intake. Please open the 

upper door to add firewood, and do not open the upper backpacking tent stove door during the burning process.

The reinforcing plate of the tail plate can ensure that the tail plate will not be deformed.

NEW TOP COVER LOCK CATCH

The lock catch on the T-BRICK Stove was designed so that side shelves can be used with it. 

When used with the side shelves, it can also enhance the stability of the lightweight tent stove.

FRONT DOOR AIR INTAKE

T-BRICK stove has a door with a slidable air intake and an octagonal glass, so that you can fine-tune the burn rate. 

The area of the air intake was increased by 15% (T1), which allows the tent stove to heat up the tent in a very short time in the cold winter.

NEW camping tent stove BAG

The new designed folding tent stove bag is more durable, with YKK zipper, more portable.