X-Ti Max 5 | Double-Fold Titanium Wood Stove | POMOLY New Arrival 2025

POMOLY X-Ti Max 5

Double Folding Titanium Stove

At the beginning of 2020, POMOLY officially introduced its iconic first product to the market - the T1 Series titanium foldable wood stove. As of November 2024, statistical data shows that the T1 Series has sold over 10,000 units, fully demonstrating its outstanding performance in the field of outdoor titanium stoves. This series exclusively uses 1.0mm thick titanium metal material and incorporates a precise reinforced rib structure design. This technological innovation ensures that the stove body maintains structural stability and durability even after enduring prolonged combustion. To this day, the T1 Series continues to attract numerous loyal users, and we have collected thousands of valuable pieces of user feedback.

WHAT'S INCLUDED:

X-Ti Max 5 Stove

Titanium Chimney

Stove Bag

Chimney Damping Base

Spark Arrestor with 3 Rings

Cut Resistant Gloves

Titanium Chimney System - 7cm / 2.76in

Ultralight spark arrestor, three detachable rings for wind ropes fixing.

Reduce the hollow area, the convex is good for catching sparks.

Upgraded to embedded inverted. (Used with titanium section chimney)

Base Edge Reinforcement Ring

We added a thicker reinforcement ring below the chimney damper to make the edge more resistant to deformation.

Reinforced Structure Top Cover / Detachable Baffle

The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover.

Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover. 

After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.

Tips: The stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the stove to rise and fall continuously, which will eventually cause the top cover to warping.

The detachable baffle can maximize the burning heat efficiency of the wood and also block sparks.

Reinforced Bottom Plate and Secondary Air Intake Tailboard

Under the condition of ensuring light weight and portability, X-Ti Max 5 adopts a three-dimensional reinforced bottom plate. The welding points minimize the deformation of the stove after burning and hollow octagons can enhance the heat dissipation effect.

After the stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.

Folding Legs

X-Ti Max 5 legs are made of a whole piece of titanium plate, which has a stronger bearing structure. 

The raised design in the middle of the stove legs are suitable for uneven ground.

Stove Door

The door of the X-Ti Max 5 stove was widened and heightened so that large pieces of wood to enter the stove easily. 

The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen 

the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the stove. 

More Precise Hinges

In order to reduce the gap between the hinges and greatly reduce the risk of smoke leakage, we have manufactured a new hinge mold, making the X-Ti Max 5 of the hinge more precise and tight.

Front Air Intake

X-Ti Max 5 stove has a slidable air intake, so that we can fine-tune the burn rate.

Accessories
The lantern hook can be matched with the X-Ti stove body to provide illumination during cooking. It can also be used together with poles and inserted into the ground for use.

POMOLY X-Ti Series 2025